Rain Test Chamber is designed according to the standards of IEC 60529-2001 & GB 4208-93 & GB10485 (Enclosure protection level). It is mainly used for electronic products to do the waterproof test of the second characteristic number 3 / 4. The appliance meets the test requirement of IP grade IPX3/IPX4.
This appliance is applicable to the enclosure protection grade assessment of electronic appliances and products. It is aiming to test the waterproof performance of enclosures by testing the harmful effect to the appliance when water into the enclosure.
1. Wewon’s rain test chambers with water pressure and flow rate adjustable.
2. Unique sprinkler can stably control the rain quantity and pressure.
3. Wewon’s rain test chamber (Model B) can make the test products’ temperature rising from RT-85°C
4. Inner case’s material is imported steel plates, Shell is made of #304 stainless steel.
5. Wewon’s rain spray test chamber applies rain spray test for products and parts.
Application: Rain testing chambers applied to test the shell’s waterproof effect of electronics, automobile and communication,using rainfall simulation to test the product’s waterproof performance and assess the product’s waterproof performance’s loss classification.
IP X1: Protected against falling water equivalent to 3-5mm rainfall per minute for a duration of 10 minutes. Unit is placed in its normal operating position. IP X2: Protected against falling water when tilted up to 15 degrees – Same as IPX-1 but unit is tested in 4 fixed positions – tilted 15 degrees in each direction from normal operating position.
IP X3: Protected against spraying water – Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min. IP X4: Protected against splashing water – Same as IPX-3 but water is sprayed at all angles.
IP X5: Protected against water jets – Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters. IP X6: Protected against heavy seas – Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters.
IP X7: Protected against water immersion – Immersion for 30 minutes at a depth of 1 meter. IP X8: Protected against water submersion – The rain spray test chamber is suitable for continual submersion in water under conditions which are identified by the manufacturer.
|Internal Dimension WxHxD (mm)||800x800x800||1000x1000x1000|
|External Dimension WxHxD (mm)||1020*1360*1560||1300*1450*1960|
|JIS Test 1||Flow:1.8L/Min~3.9L/Min||Flow:24.5L/Min~39.2L/Min|
|JIS Test 2||Pressure:0.1kgf/cm2~0.3 kgf/cm2||Pressure: 1kgf/cm2~3 kgf/cm2|
|Drop Test||1~1.5mm/Min Adjustable||3~3.5mm/Min Adjustable|
|Gross Weight (Kgs)||265.0 Kgs||350.0 Kgs|
|Voltage (V)||AC 1Ψ 220V 60/50Hz 2.5 KW||AC 3Ψ 380V 60/50Hz 4.5 KW|
|Rain of Pipe-Swing Test||IPx3 IPx4 swing pipe: RT~±80°C||Flow:0.07L/min per Nozzle|
|Water Spray Test||IP X3 IP X4 jet:2.5m~3m||Flow :12.5L/min ~100L/Min|
|High Pressure Jet Test||80Kgf~100Kgf||Flow:14~16L/Min|
|Rotating Speed of Rotating-Plate||4~20 RPM Adjustable||4~20 RPM Adjustable|
|Test Standard||JIS, ISO, IEC60529, DIN40050,||GB2423, GB4208 Standard|